TeleScript TECHi™ Web Connect Controller Windows
You can control TECHi using a web browser on another device on the same subnet of your LAN.
Opening the Web Controller
1. Preparation
- Install TeleScript TECHi on your Apple iPad®.
- Open "Settings" and slide "Enable web file manager and controller" to the right (Enabled)
- If you prefer, you can assign a user name and password. We recomment this to prevent unauthorized access to prompting app.
- Get your iPad's IP address. Do this by pressing the "Information" icon on the bottom left of the TECHi screen. Read and record "Web interface:". For this example, use http://192.168.0.100.
2. Opening the interface
In your broswer on the address bar, enter the URL which you copied in the first section as follows:
http://192.168.0.100/control.html
(note that this is an example. Use the IP address copied from your iPad.) The key's labels correspond to functions on the TECHi screen. Start/Stop is a "toggle"; i.e., the lable will change to reflect the scrolling state of TECHi. You may find it easiest to control the speed by tapping the "+" and "-" buttons on the ends of the control strip.
